Data Recovery Perth we will get your data back
Hi we are a specialist data recovery shop operating in the Perth area for the last 10 years. We can get your data back quickly , efficiently and at reasonable prices.
Data Recovery is never convenient your failed device or drive always fails just when you need it. The data loss is invariably crucial to your life and or business and in some cases the loss of data can mean the failure of your livelihood and all the things that depend upon that. I have seen this many times and but it is important to remember the chances of Data Recovery are high .
We can Recover From
- Hard Drives
- USB Drives
- NAS systems
- RAID Devices
- SSD Drives
- Windows NTFS and FAT filesystems
- Apple MAC file systems (HFS)
- Linux file systems (EXT2,EXT3,EXT4)
- Recover Deleted Files
- Recover Deleted Partitions
- Repair Failed Electronics
- Repair Corrupt Firmware
- Restore Failing Magnetic surface
- Failed Heads
Hard disc drive contains a set of service data, called firmware that controls its hardware and is vital for its proper functioning. The firmware can be compared to the Operating System installed on your computer.
Just like Operating System allows your computer to run a certain application, the firmware allows all parts of a hard drive to operate smoothly and provides an access to disc contents.
Some common symptoms indicating firmware corruption are;
If the hard drive cannot read the service area modules this can result in a Clicking noise
The hard drive spins up , no clicking, but cannot be detected by your computer.
The hard drive spins up , no clicking, but is shown to have 0GB capacity.
The hard drive spins up but cannot read your data
Firmware codes are located in the system area on data platters and in the ROM (Read-only Memory) of PCB (Printed Circuit Board). If the firmware is corrupt, the drive will fail even if its electronic and mechanical components are fully functional.
List of the modules contained on the SYSTEM AREA of modern Seagate F3 (7200.11 and above)
Module Sys. file Description
Module Sys. file Description
00 Defect list of SA
01 0x001A Drive information file
02 0x0019 Performance parameter file
03 0x001B P-List
04 0x003F SAP (Servo Adaptive FParameters)
05 0x0300 Manufacturin information file
06 0x0001 RAP (Read Adaptives Parameters)
07 0x0208 CAP (Controller Adaptives Parameters)
09 0x0133 SMART config (filling by pattern)
0A 0x0134 SMART Frame 0C 0x0139 Self scan log
DIC (Data integrity check), Head 0 0F DIC Dummy file
13 0x030A Disk reestr (Security settings)
15 0x0306 Offline selfscan of surface (DOS)
1D 0x0100 Overlay 0 1E 0x0101 Overlay 1
22 File selfscan surface, head 0
23 File selfscan surface, head 1
24 File selfscan surface, head 2
25 File selfscan surface, head 3
26 File selfscan surface, head 4
27 File selfscan surface, head 5
28 File selfscan surface, head 6
29 File selfscan surface, head 7
To repair firmware problems specialised tools are required to access and modify the System Area of Western Digital, Seagate, Hitachi, Fijitsu, Samsung drives.
Here at dig IT we use the Dolphin Data Labs FRP tools ,see pic right, to perform these repairs and diagnosis of hard drive problems.
Dolphin Data Labs Firmware Repair Tools include fixes for common firmware problems
Seagate drives also have a Terminal Mode which allows the Firmware repair tool to initiate commands directly to the firmware of the drive. In terminal mode the drive also displays errors that have occurred during the drives spin up sequence and the following are some common errors for Seagate drives;
- Failed to load overlay 00000004 – This is usually associated with some hardware error and can be caused by non-native adaptives (i.e non-original ROM).
- SIM error 1002 – This message alerts us to some error with one or more defect list. Potentially P-list or NRG list can be bad.
- SIM error 2044 – Translator tables cannot be read or are damaged.
- SIM error 1009 – Module 17A is damaged.
- SIM Error 203F / SIM Error 2040 / SIM Error 2044 / SIM Error 3005 – Also seem to be damaged or unreadable translator related errors.
- LED:00000047 FAddr:FFFFFFFE – Usually this relates to Media Cache.
- LED:000000BC FAddr:00006220 – Usually this also relates to Media Cache or some relocation parameters.
- SIM ERROR 3005 – Mean that “format corrupted flag” in on and Translator is not loaded in RAM.
- “No HOST FIS-ReadyStatusFlags” – (reason message: why translator is not loaded).
REQUEST A QUOTE
126 Whatley Crescent Maylands
call: (08) 6180 6959
126 Whatley Crescent
6 Days a week from 8:00am – 5:00pm
Some of our Success Stories
Diagnosis of a damaged PCB One of the first steps in Data Recovery is assessing the health of the electronics of a hard drive and a replacement of the PCB should occur if The PCB appears damaged If the hard drive does not spin up then it is usually due to a damaged...read more
I use data recovery tools from Salvation Data which are specifically designed for Western Digital and Seagate hard drives and they are essential in my daily work when assessing the health of a hard drive. These tools allow you to do the following tasks; Diagnose...read more
It is quite common to encounter firmware corruption on Seagate Hard Drives of all their models but the latest Seagate drives the 7200.14 have added a new twist. The Seagate 7200.11 and 7200.12 drives had the familiar busy error where the drive does not show up in you...read more