Data Recovery Perth we will get your data back
Hi we are a specialist data recovery shop operating in the Perth area for the last 10 years. We can get your data back quickly , efficiently and at reasonable prices.
Data Recovery is never convenient your failed device or drive always fails just when you need it. The data loss is invariably crucial to your life and or business and in some cases the loss of data can mean the failure of your livelihood and all the things that depend upon that. I have seen this many times and but it is important to remember the chances of Data Recovery are high .
We can Recover From
- Hard Drives
- USB Drives
- NAS systems
- RAID Devices
- SSD Drives
- Windows NTFS and FAT filesystems
- Apple MAC file systems (HFS)
- Linux file systems (EXT2,EXT3,EXT4)
- Recover Deleted Files
- Recover Deleted Partitions
- Repair Failed Electronics
- Repair Corrupt Firmware
- Restore Failing Magnetic surface
- Failed Heads
RAID and NAS Data Recovery
Dedicated Raid systems
are typically found in servers and are implemented by using a dedicated RAID controller card or the in-built functionality contained on modern server motherboards and allow for data to span multiple drives as can be seen with image right
are typically used as backup systems for smaller enterprises and the RAID is implemented in software via the Linux operating system which is slower that dedicated RAID controllers.
It should be noted that NAS raid devices should be used as a backup device and not as a primary storage option.
RAID 0 – is used mainly to increase system performance as compared to a single disk. RAID 0 recovery is relatively simple however if one of the disks is unreadable data recovery is awkward.
RAID 1 – are mirrored drives to enable redundancy and is easy to recover .
RAID 0+1 , same as RAID 1+0 is based on mirroring and striping techniques. . Such arrays will survive a single disk failure and can survive multiple disk failures .
RAID 5 – sometimes called stripe set with parity – RAID 5 recovery is more complicated than for RAID 0, but the data can still be recovered if one of the disks had failed.
RAID 6 . RAID 6 recovery is very complex.
We use a variety of software tools to recover data from damaged RAID’s.
DiskInternals – DiskInternals Raid Recovery
Runtime – Runtime RAID Reconstructor
ReclaiMe RAID – ReclaiMe Free RAID Recovery build 301
R-Studio – R-Studio
ZAR – Zero Assumption Recovery version 8.5
REQUEST A QUOTE
126 Whatley Crescent Maylands
call: (08) 6180 6959
126 Whatley Crescent
6 Days a week from 8:00am – 5:00pm
Some of our Success Stories
I recently received a phone call from a distressed farmer who had driven 4 hours from Southern Cross because the GPS device which attaches to his tractor had received a power surge and would now not boot up. Farmers use these devices to track...read more
Diagnosis of a damaged PCB One of the first steps in Data Recovery is assessing the health of the electronics of a hard drive and a replacement of the PCB should occur if The PCB appears damaged If the hard drive does not spin up then it is usually due to a damaged...read more
I use data recovery tools from Salvation Data which are specifically designed for Western Digital and Seagate hard drives and they are essential in my daily work when assessing the health of a hard drive. These tools allow you to do the following tasks; Diagnose...read more